How to ensure verticality and horizontality during the installation of the moving door?
Publish Time: 2024-11-06
During the installation of the moving door, ensuring verticality and horizontality is essential for its normal operation and beauty.
In the preparation stage of installation, the installation site should be accurately measured and cleaned first. Use a professional level and theodolite to determine the original vertical and horizontal state of the door opening, and mark any uneven or tilted areas. If there is a large deviation in the door opening, it needs to be trimmed first. At the same time, clean up the debris and dust in the door opening to provide good basic conditions for installation.
For the installation of the track of the moving door, this is a key step to ensure verticality and horizontality. Use a level to measure along the installation position, and ensure that the track is completely horizontal in the horizontal direction by adjusting the height of the track's mounting bracket. In the vertical direction, a plumb line can be used to ensure the verticality of the track. For longer tracks, multiple measuring points can be added to ensure overall straightness. During the installation process, use high-quality expansion bolts or other suitable fixings to firmly fix the track above the door opening or on the ground (depending on the type of track) to avoid displacement due to loose fixing in subsequent use.
When installing the moving door body, set up temporary auxiliary supports and adjustment devices at the top and bottom of the door body (if there is a bottom guide structure). Slowly put the door body into the track and adjust the height of the auxiliary supports to keep the door body vertical in the vertical direction. In the horizontal direction, by fine-tuning the matching position of the door body and the track, ensure that the door body can slide freely in the track without left and right deviation. At the same time, some temporary gaskets can be placed between the door body and the track to assist in the adjustment until the ideal vertical and horizontal state is achieved.
After the installation is completed, use the level and plumb line to fully check and fine-tune the moving door again. In the daily use of the moving door, it is also necessary to regularly check and maintain its verticality and horizontality to ensure its long-term stable operation.
