It is very important to ensure the sealing of the single glass partition during installation, because this is directly related to the sound insulation, heat insulation and dustproof effect of the partition. The following are several key steps and precautions to ensure the sealing when installing the single glass partition:
1. Preliminary preparation
Material selection: Select high-quality sealing materials, such as rubber gaskets, sealants, etc., to ensure that these materials have good elasticity and aging resistance.
Base treatment: Ensure that the surface of the base for installing the glass partition is flat, dry, free of oil and debris, so as to ensure that the sealing material can fit the base tightly and form a good sealing effect.
2. Installation process
Line positioning: According to the design drawings, pop up the vertical and horizontal positioning lines of the glass partition on the wall to ensure the accuracy of the installation position of the glass partition.
Install the frame: Install the frame of the glass partition according to the positioning line, ensure the verticality and horizontality of the frame, and use a level ruler and a vertical ruler to check.
Glass installation: Put the glass into the frame, ensure that the gap between the glass and the frame is uniform, and use a special clamp to fix the glass to prevent the glass from shifting during installation.
Sealing: Use rubber gaskets to fill the gap between the glass and the frame, and use sealant to seal the gap. When applying sealant, make sure that the glue layer is uniform, free of bubbles, and fully fills the gap.
Inspection and acceptance: After installation, conduct a comprehensive inspection of the glass partition to ensure that all gaps are sealed and there is no air leakage or water leakage. At the same time, use tools such as flashlights to check the light transmittance and sealing of the glass partition.
III. Precautions
Avoid being too tight or too loose: During the installation process, avoid the gap between the glass and the frame being too tight or too loose to avoid affecting the sealing effect.
Pay attention to cleaning: Before and during installation, keep the glass and frame clean to avoid dust and debris affecting the sealing effect.
Choose a professional construction team: Choose a construction team with rich experience and professional skills for installation to ensure installation quality and sealing effect.
Through the above steps and precautions, you can ensure that the Single glass partition has good sealing during installation, thereby achieving good sound insulation, heat insulation and dustproof effects.
