In order to ensure that water does not splash outside when the shower room is in use, the following waterproof designs or measures can be taken:
Install a water barrier:
Install a water barrier at the bottom of the shower room glass. The water barrier can effectively prevent the bath water from spreading outside the shower room and prevent the ground from getting wet.
There are many choices for the material of the water barrier, such as PVC, artificial stone, marble, granite, etc. Mid-to-high-end materials such as marble and granite are more durable.
The installation methods of the water barrier include placement installation and embedded installation. Embedded installation requires advance design, but the waterproof effect will be better, and there will be basically no water seepage.
Bottom basin waterproofing:
In the early days, shower room floor waterproofing mostly used bottom basin waterproofing. However, the quality of the bottom basin is uneven, easy to break, and troublesome to repair, and not beautiful.
If you choose bottom basin waterproofing, you should ensure that the bottom basin is of reliable quality and check regularly for damage or aging.
Sinking waterproofing:
The ground is sunk in advance, and the shower area is slightly lower than the ground by 1-2 cm, forming a shower area sunk to the ground, and the ground slope is used for natural drainage and drainage.
The sunken waterproofing is highly aesthetic and has better water-retaining function, but the waterproofing treatment is troublesome, the decoration cost is high, and the construction requirements are high.
Barrier-free floor drain waterproofing:
Adopt a drainage solution without water retaining strips and ground sinking, combine the drainage trough and partition track into one, and the ground has no bottom frame and no protrusions to keep the ground flat inside and outside.
The barrier-free shower room design does not trip you in and out, which is more in line with the modern home concept of humanized safety.
Pay attention to the glass material and installation:
Ensure that the tempered glass used in the shower room is greater than 6mm thick, and the corners should be engraved with the 3C logo.
When installing the shower room, please ask professionals to install it on site to avoid the risk of self-explosion of the glass due to improper installation.
Correct use and maintenance:
When using the shower room, avoid suddenly raising the hot water temperature of the shower head to prevent the glass from exploding due to uneven heating.
When cleaning the shower room, use a soft cloth with neutral detergent to clean it, and avoid using alkaline or acidic detergents to corrode the glass surface.
Through the above-mentioned waterproof design or measures, combined with correct use and maintenance, it can be ensured that water will not splash outside when the shower room is in use, providing users with a safe and comfortable shower environment.
